综合孔径微波辐射探测系统仿真平台设计

由于综合孔径微波辐射探测系统在理论分析和大型阵列物理系统构建方面都十分复杂,因而仿真成为十分重要的研究手段。从系统建模、“搭积木”设计、模型/算法库设计、多级仿真设计以及体系架构等方面论述了综合孔径微波辐射探测系统仿真平台的设计,仿真内容涵盖被探测目标、环境、天线阵列、接收机通道和信号处理等。实验结果表明,该平台能正确模拟对远距空中目标的微波辐射探测,可用于综合孔径微波辐射探测理论及系统设计的研究。     

外气的旋频曲线的实验研究

“旋转曲线”是旋子模型及旋子流假说的重要内容，该曲线在气功外气的研究中占有重要地位。本文从实验的角度证实了旋频曲线的存在，证明了意念对外气的调制作用．     

新型红外测油仪中的液芯波导技术

首次将液芯波导技术应用于中红外吸收测量的油成分分析领域, 研制的新型MFA-450型红外测油仪的灵敏度比现有同类型仪器提高一个数量级, 检出限为0.01 mg/L(油/萃取剂).     

红外焦平面探测器输出图像信噪比计算和分析

推导了红外焦平面探测器输出图像信噪比的一般计算公式 ,并针对红外焦平面探测器在地面面目标自动识别系统中的具体应用 ,计算了其在不同天气情况下的成像信噪比。由计算结果可知 :采用高性能的焦平面探测器后 ,红外成像的图像信噪比非常高 ,即使在较恶劣的天气 (大雾 )情况下也可获取质量较好的红外图像 ,满足自动目标识别系统图像处理的需求     

Increase in the survival time of mice exposed to ionizing radiation by a new class of free radical scavengers

Summary N-acyl dehydroalanines react with and scavenge mainly superoxide radical and hydroxyl radical (HO^.). The ortho-methoxyphenylacetyl dehydroalanine derivative, indexed as AD-20, protects mice against damage resulting from total body X-irradiation, as measured by the increase in their survival time. AD-20 increases the LD₅₀ at 30 days from 6.1 to 7.3 Gy in animals exposed to a wide range of X-rays (6 to 10 Gy). The dose reduction factor (D R F) of AD-20 is 1.20. We postulate that such radioprotective effect may result from its free radical scavenging activity.     

用于焊缝跟踪的调制式红外光学传感器

叙述了一种以脉冲调制的红外光束为信号光源的焊缝跟踪传感器。通过对接 收信号的滤波及“自适应消噪”处理,可以有效地克服电弧光的干扰;利用光源的脉冲 驱动特性,加大了瞬时信号功率,改善了光学传感器对工件表面的适应性。传感器结构简 单、体积小、灵敏度高、能同时实现对焊缝在水平及高度两个方向的自动跟踪在埋弧 及明弧自动焊中均能准确地跟踪。     

傅里叶变换红外光声光谱法在纺织上应用

本文叙述了傅里叶变换红外光声光谱法(FTIR-PAS)的基本原理及其在纺织上应用。研究了组合浆料中变性聚乙烯醇的定量测定、涤棉混纺纤维中涤纶的定量测定、苎麻及甲壳素经碱处理后的光谱性质的变化。研究结果表明,以变性聚乙烯醇C=O基团的伸缩振动1570cm~(-1)吸收峰可作为定量测定变性聚乙烯醇的依据。以涤纶分子结构中羰基伸缩振动1725cm~(-1)峰高与纤维分子结构中碳氢键伸缩振动2915cm~(-1)峰高的比值,可定量测定涤棉混纺纤维中涤纶含量。苎麻经碱处理后,非晶谱带898cm~(-1)度明显增加,晶区谱带1430cm~(-1)强度明显下降,其变化程度取决于碱浓度。甲壳素的酰胺吸收峰1555cm~(-1)随碱处理浓度、温度和时间的增加而下降。与常规的红外吸收光谱法相比较,傅里叶变换红外光声光谱法具有无损快速的优点,适宜于制作困难的试样。     

对角度规谐和条件下不存在引力辐射和引力波

证明了在对角度规谐和条件下,在不存在引力辐射和引力波,并对Ｂｏｎｄｉ引力平面波和引以立波进了讨论。     

Relationship between giant magnetoresistance of NiFe/Cu multilayers and their microstructures

The (111)-orientated NiFe/Cu multilayers were prepared by magnetron sputtering method. At room temperature, saturation magnetoresistances of NiFe/CU multilayers oscillate as a function of Cu spacer layer thickness. Two peak GMR values of 19.4%, 11.6% and 11.2%, 1% appear, respectively, at Cu sublayer thickness of t_Cu,= 1.0, 2.2 nm while the deposition pressures are 0.25 and 0.45 Pa. X-ray small-angle reflections and diffuse scattering at Cu K-edge (8.979 keV) by synchrotron radiation source were used to characterize the interfacial roughness. Diffraction anomalous fine-structure scattering (DAFS) was performed to investigate the local structure of NiFe and Cu sublayers. Results show that the deposition pressure has effect on interfacial roughness of the samples obviously, and the interfacial roughness also affects the GMR values of the samples strongly.